Jenkins的安装、部署、启动(完整教程)
Jenkins的安装、部署、启动(完整教程)
测试环境
Linux系统 Centos 7
安装步骤：
1、安装jdk
我安装的是jdk8，此处就不多说了，自己百度哈，很简单
2、安装jenkins
首先依次执行如下三个命令：
2.1、导入镜像：
[root@centos7 ~]# sudo wget -O /etc/yum.repos.d/jenkins.repo https://pkg.jenkins.io/redhat-stable/jenkins.repo--2019-12-24 17:59:44-- https://pkg.jenkins.io/redhat-stable/jenkins.repoResolving pkg.jenkins.io (pkg.jenkins.io)... 52.202.51.185Connecting to pkg.jenkins.io (pkg.jenkins.io)|52.202.51.185|:443... connected.HTTP request sent, awaiting response... 200 OKLength: 85Saving to: ‘/etc/yum.repos.d/jenkins.repo’100%[=====================================================================================================================================================>] 85 --.-K/s in 0s 2019-12-24 18:00:47 (17.4 MB/s) - ‘/etc/yum.repos.d/jenkins.repo’ saved [85/85]
2.2、导入公钥
[root@centos7 ~]# sudo rpm --import https://pkg.jenkins.io/redhat-stable/jenkins.io.key
2.3、安装jenkins：
[root@centos7 ~]# yum install jenkinsLoaded plugins: fastestmirror Loading mirror speeds from cached hostfile Resolving Dependencies--> Running transaction check---> Package jenkins.noarch 0:2.204.1-1.1 will be installed--> Finished Dependency ResolutionDependencies Resolved =============================================================================================================================================================================================== Package Arch Version Repository Size =============================================================================================================================================================================================== Installing: jenkins noarch 2.204.1-1.1 jenkins 60 M Transaction Summary ===============================================================================================================================================================================================Install 1 PackageTotal download size: 60 M Installed size: 61 MIs this ok [y/d/N]: y Downloading packages: Delta RPMs disabled because /usr/bin/applydeltarpm not installed. jenkins-2.204.1-1.1.noarch.rpm FAILED http://pkg.jenkins.io/redhat-stable/jenkins-2.204.1-1.1.noarch.rpm: [Errno 12] Timeout on http://pkg.jenkins.io/redhat-stable/jenkins-2.204.1-1.1.noarch.rpm: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds') Trying other mirror. jenkins-2.204.1-1.1.noarch.rpm FAILED http://pkg.jenkins.io/redhat-stable/jenkins-2.204.1-1.1.noarch.rpm: [Errno 12] Timeout on http://pkg.jenkins.io/redhat-stable/jenkins-2.204.1-1.1.noarch.rpm: (28, 'Connection timed out after 30001 milliseconds') Trying other mirror. jenkins-2.204.1-1.1.noarch.rpm | 60 MB 00:04:26 Running transaction checkRunning transaction testTransaction test succeeded Running transactionWarning: RPMDB altered outside of yum. ** Found 1 pre-existing rpmdb problem(s), 'yum check' output follows: authconfig-6.2.8-30.el7.x86_64 has missing requires of newt-python Installing : jenkins-2.204.1-1.1.noarch 1/1 Verifying : jenkins-2.204.1-1.1.noarch 1/1 Installed: jenkins.noarch 0:2.204.1-1.1 Complete!
2.4、修改配置文件
[root@centos7 ~]# vi /etc/sysconfig/jenkins
修改这部分：
## Default: 8080## ServiceRestart: jenkins## Port Jenkins is listening on.# Set to -1 to disable#JENKINS_PORT="8091"## Type: string## Default: ""## ServiceRestart: jenkins
2.5、启动jenkins
[root@centos7 ~]# systemctl start jenkinsJob for jenkins.service failed because the control process exited with error code. See "systemctl status jenkins.service" and "journalctl -xe" for details.
2.6、查看jenkins的启动状态
[root@centos7 ~]# systemctl status jenkins● jenkins.service - LSB: Jenkins Automation Server Loaded: loaded (/etc/rc.d/init.d/jenkins; bad; vendor preset: disabled) Active: failed (Result: exit-code) since Tue 2019-12-24 18:12:05 CST; 11s ago Docs: man:systemd-sysv-generator(8) Process: 23175 ExecStart=/etc/rc.d/init.d/jenkins start (code=exited, status=1/FAILURE)Dec 24 18:12:05 centos7 systemd[1]: Starting LSB: Jenkins Automation Server...Dec 24 18:12:05 centos7 runuser[23180]: pam_unix(runuser:session): session opened for user jenkins by (uid=0)Dec 24 18:12:05 centos7 jenkins[23175]: Starting Jenkins bash: /usr/bin/java: Is a directoryDec 24 18:12:05 centos7 systemd[1]: jenkins.service: control process exited, code=exited status=1Dec 24 18:12:05 centos7 jenkins[23175]: [FAILED]Dec 24 18:12:05 centos7 systemd[1]: Failed to start LSB: Jenkins Automation Server.Dec 24 18:12:05 centos7 systemd[1]: Unit jenkins.service entered failed state.Dec 24 18:12:05 centos7 systemd[1]: jenkins.service failed.
出现这种情况的解决办法是：
修改 jenkins 的配置文件中使用的 jdk 路径
[root@centos7 ~]# echo $JAVA_HOME/usr/java/jdk1.8.0_191 [root@centos7 ~]# vi /etc/init.d/jenkins
注意：这里echo $JAVA_HOME 出来的路径，后面一定跟启动路径（/bin/java）
2.7、重启并查看 jenkins 状态
systemctl daemon-reloadsystemctl restart jenkins
我的 jenkins 启动后是这样子的：
[root@centos7 docker]# systemctl daemon-reload[root@centos7 docker]# systemctl restart jenkins [root@centos7 docker]# systemctl status jenkins● jenkins.service - LSB: Jenkins Automation Server Loaded: loaded (/etc/rc.d/init.d/jenkins; bad; vendor preset: disabled) Active: active (running) since Tue 2019-12-24 18:16:08 CST; 12s ago Docs: man:systemd-sysv-generator(8) Process: 23787 ExecStart=/etc/rc.d/init.d/jenkins start (code=exited, status=0/SUCCESS) CGroup: /system.slice/jenkins.service └─23832 /software/jdk1.8.0_191/bin/java -Dcom.sun.akuma.Daemon=daemonized -Djava.awt.headless=true -DJENKINS_HOME=/var/lib/jenkins -jar /usr/lib/jenkins/jenkins.war --logfile=/v...Dec 24 18:16:02 centos7 systemd[1]: Starting LSB: Jenkins Automation Server...Dec 24 18:16:02 centos7 runuser[23792]: pam_unix(runuser:session): session opened for user jenkins by (uid=0)Dec 24 18:16:08 centos7 runuser[23792]: pam_unix(runuser:session): session closed for user jenkinsDec 24 18:16:08 centos7 systemd[1]: Started LSB: Jenkins Automation Server.Dec 24 18:16:08 centos7 jenkins[23787]: Starting Jenkins [ OK ] [root@centos7 ~]# lsof -i:8091COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAMEjava 23832 jenkins 160u IPv4 11605726 0t0 TCP *:jamlink (LISTEN)
好了，此时已经表示 Jenkins 顺利安装并启动成功了！
2.8、访问浏览器: http://localhost:8091/ 出现如下提示：
Please wait while Jenkins is getting ready to work...
解决办法：
进入jenkins的工作目录（/var/lib/jenkins/），打开 hudson.model.UpdateCenter.xml
把 http://updates.jenkins-ci.org/update-center.json 改成如下三个地址之一均可：
# 修改更新地址（到其中一种即可）：http://mirror.xmission.com/jenkins/updates/update-center.jsonhttp://updates.jenkins.io/update-center.jsonhttps://mirrors.tuna.tsinghua.edu.cn/jenkins/updates/update-center.jsonhttp://mirror.esuni.jp/jenkins/updates/update-center.json
然后重启并查看 jenkins 状态：
[root@centos7 ~]# vi hudson.model.UpdateCenter.xml [root@centos7 ~]# systemctl daemon-reload[root@centos7 ~]# systemctl restart jenkins [root@centos7 ~]# systemctl status jenkins
查看密码：
cat /var/lib/jenkins/secrets/initialAdminPassword
然后直接选推荐安装的插件，或者直接下一步就完事儿了！
2.9、设置jenkin语言为中文
需要的话，还可以设置语言为中文
1、系统管理->插件管理->可用插件：安装Locale Plugin插件（https://wiki.jenkins.io/display/JENKINS/Locale+Plugin），重启；
2、如果没有搜索到这个插件，就直接官网（https://github.com/jenkinsci/locale-plugin或者https://updates.jenkins.io/download/plugins/locale/）下载安装：
系统管理->插件管理->高级->上传插件，安装重启；3、系统管理->系统管理->locale language->输入zh_CN
最新版本的jenkins，即使设置了zh_CN也有可能是中英文混搭风， 因为最新版本没有针对所有内容都翻译成中文。
卸载
[root@centos7 ~]# rpm -e jenkinswarning: /etc/sysconfig/jenkins saved as /etc/sysconfig/jenkins.rpmsave warning: /etc/init.d/jenkins saved as /etc/init.d/jenkins.rpmsave [root@centos7 ~]# systemctl stop jenkinsFailed to stop jenkins.service: Access denied See system logs and 'systemctl status jenkins.service' for details. Failed to get load state of jenkins.service: Access denied [root@centos7 ~]# rpm -ql jenkinspackage jenkins is not installed [root@centos7 ~]# find / -iname jenkins | xargs -n 1000 rm -rf[root@centos7 ~]#